节流阀清洁剂

功效说明

能彻底清洁及润滑节流阀总成:快速清洁积碳,防止熄火及回火产生;

预防积碳产生的怠速不稳及油耗增加;不伤及原厂节流阀体镀层,补上含氧感知器。

使用方法

1、关闭发动机;

2、将进气软管从进气歧管上移开;

3、讲抹布放置在进气其管辖,将导管插在节流阀清洁机上;

4、将节流阀清洁剂喷洒在有积碳或油泥存在的节流阀表面;

5、将节流阀打开一定角度,将导管伸入歧管持续喷洒5-10秒钟;

6、用擦拭布将节流阀内外表面和进气歧管内的积碳和油泥擦拭干净;

7、如有必要,可重复以上步骤;

8、清洗操作后,必须用压缩空气将进气歧管吹干,或将节流阀打开一定角度,是的残留在进气气管内的清洁剂充分挥发,避免发生回火现象。

Product performance

Can thoroughly clean and lubrication throttle valve assembly; Quick clean carbon deposition, prevent quenching and tempering; Prevention of carbon deposition of unstable idle speed and fuel consumption increase; Don't hurt original throttle body coating, the oxygen sensors.

Usage

Shut down the engine; The air intake hose from the diverse intake manifold; Place the cloth under the intake manifold, insert the catheter on cleaing agent; The throttle spray cleaner on the surface of the throttlu valve that presence of carbon deposition and sludge; Open the throttlu Angle, the catheter into the intake manifold for spray 5-10 seconds; The throttle with wiing cloth inside and outside surface and inside the intake manifold of carbon deposition and sludge to wipe clean; If necessary, can repeat the above setps; After cleaning operations, must blow dry with compressed air intake manifold, or open the throttle Angle, make the residual in the detergent fully evaporate inside the intake manifold, avoid tempering phenomenon.

 

本网站由阿里云提供云计算及安全服务 Powered by CloudDream